PRODUCT DATA SHEET

AMBERLITE 200 C Na

Strong Acid Cation Exchange Resin
AMBERLITE 200 C Na is a premium grade strong acid macroreticular cation exchange resin based on sulfonic acid exchange groups on a polystyrenic matrix. Its high degree of crosslinking imparts superior stability to the macroreticular structure of the resin. This gives it far greater resistance to chemical oxidation and higher stability to breakdown from mechanical, thermal or osmotic shocks than any other commercially available cation resins. AMBERLITE 200 C Na is recommended for make up demineralisation and mixed bed units, hot process softeners, chemical processing, metal treatment applications and systems involving appreciable oxidative potential or high temperatures.
 
PROPERTIES
Matrix_______________________________ Styrene divinylbenzene copolymer
Functional groups______________________ SO3-
Physical form__________________________ Beige beads
lonic form as shipped____________________ Na+
Total exchange capacity[1]________________ ≥ 1.70 eq/L (Na+ form)
Moisture holding capacity[1]_______________ 46 - 52 % (Na+ form)
Shipping weight________________________ 800 g/L
Specific gravity ________________________ 1.22 to 1.26 (Na+ form)
Particle size  
   Uniformity coefficient__________________ ≤ 1.70
   Harmonic mean size___________________ 600 - 850 μm
   Fine contents[1]_______________________ < 0.355 mm : 1.0 % max
   Coarse beads________________________ > 1.180 mm : 5.0 % max
Maximum reversible swelling______________ Na+ → H+ : 6%
[1] Contractual value
    Test methods are available on request.
SUGGESTED OPERATING CONDITIONS
pH range ____________________________
0  - 14
Service flow rate_______________________
5 to 40 BV*/h
Regenerant__________________________
HCl              H2SO4              NaCl
    Flow rate (BV/h) ____________________
4 to 5           2 to 20          2 to 8
    Concentration (%)___________________
5 to 8           0.7 to 6         10
    Level (g/L) ________________________
40 to100      40 to 200      80 to 300
    Minimum contact time________________
30 minutes
Slow rinse ___________________________
2 BV at regeneration flow rate
Fast rinse ___________________________
2 to 4 BV at service flow rate


HYDRAULIC CHARACTERISTICS
AMBERLITE 200 C Na gives a pressure drop of about 10 kPa/m bed depth per 10 m/h at 15 °C.
A backwash flow rate of 18 m/h gives a bed expansion of about 65 % at 15 °C.

http:// bonlite.com E-mail: born8625@naver.com

Copyright BORN CHEMICAL Co.,Ltd. All Right Reserved.